implement local binding, rfc-based tests, fix deficiencies, add CI
This commit is contained in:
1 parent
8962406c57
commit
2b2fe66785
17 files changed
+3076
-1491
No files matched your search
+25
-17
@@ -1,18 +1,9 @@
|
||||
# rust-bfd configuration. Install as /etc/rust-bfd/config.yaml (or pass --config / set BFD_CONFIG).
|
||||
# rust-bfd configuration. Install as /etc/rust-bfd/config.yaml, or select another file with --config / BFD_CONFIG.
|
||||
# This file is the only way to configure the daemon.
|
||||
#
|
||||
# Precedence, lowest to highest: built-in defaults < this file < BFD_* environment < command line.
|
||||
# Values shown below are the built-in defaults unless noted. Unknown keys are an error.
|
||||
|
||||
# Local address(es) to bind and use as the source of BFD control packets. Required (here, in BFD_BIND, or via --bind).
|
||||
# Accepts a single address, a list, or a comma-separated string. The daemon currently supports exactly one address;
|
||||
# the list form is accepted so configs do not need to change once multiple binds are implemented.
|
||||
# Env: BFD_BIND="192.0.2.1" (or "192.0.2.1,2001:db8::1")
|
||||
# CLI: --bind 192.0.2.1 [--bind ...] (replaces the addresses configured here)
|
||||
bind: 192.0.2.1
|
||||
# bind: [192.0.2.1, "2001:db8::1"]
|
||||
|
||||
# Directory of executable scripts run, in lexical order, on every session state change.
|
||||
# Env: BFD_HOOKS_DIR
|
||||
hooks_dir: /etc/rust-bfd/hooks.d
|
||||
|
||||
# Settings inherited by every peer that does not override them. Durations are humantime strings (300ms, 1s, 2m).
|
||||
@@ -20,22 +11,36 @@ hooks_dir: /etc/rust-bfd/hooks.d
|
||||
defaults:
|
||||
# Minimum interval between transmitted control packets that we would like to use once the session is Up. Sessions
|
||||
# that are not Up transmit no faster than once per second regardless (RFC 5880 section 6.8.3).
|
||||
# Env: BFD_DEFAULTS_DESIRED_MIN_TX
|
||||
desired_min_tx: 300ms
|
||||
# Minimum interval between received control packets we can support.
|
||||
# Env: BFD_DEFAULTS_REQUIRED_MIN_RX
|
||||
required_min_rx: 300ms
|
||||
# Detection time multiplier: we declare the session down after this many missed packets.
|
||||
# Env: BFD_DEFAULTS_DETECT_MULT
|
||||
detect_mult: 3
|
||||
|
||||
# Peers to establish sessions with. Peers can only be configured here and with --peer (repeatable, addresses only,
|
||||
# default settings); they cannot be set from the environment. Each peer's address must match the family of at least
|
||||
# one bind address.
|
||||
# Peers to establish sessions with.
|
||||
#
|
||||
# `local` is required: the local address the session runs from, which is the source of its control packets and the
|
||||
# address the daemon listens on for the peer's. It must be of the same address family as `address`. The daemon listens
|
||||
# on each distinct `local` address (and `interface`, below) once, however many peers use it; peers may use different
|
||||
# local addresses.
|
||||
#
|
||||
# `interface` optionally binds the session's sockets to one interface (SO_BINDTODEVICE). It is required when `local` or
|
||||
# `address` is an IPv6 link-local address (fe80::/10), which is only meaningful on a given link. The same peer address
|
||||
# may be configured on several interfaces. The binding is to the interface as it exists at startup: if it is
|
||||
# recreated, the daemon must be restarted.
|
||||
peers:
|
||||
- address: 192.0.2.2
|
||||
local: 192.0.2.1
|
||||
# - address: 2001:db8::2
|
||||
# local: "2001:db8::1"
|
||||
#
|
||||
# - address: "fe80::2"
|
||||
# local: "fe80::1"
|
||||
# interface: eth1
|
||||
#
|
||||
# Per-peer overrides of any `defaults` key:
|
||||
# - address: 192.0.2.3
|
||||
# local: 192.0.2.1
|
||||
# desired_min_tx: 1s
|
||||
# required_min_rx: 1s
|
||||
# detect_mult: 5
|
||||
@@ -51,6 +56,7 @@ peers:
|
||||
# Keyed MD5: `key` is exactly 16 bytes. `meticulous` (default true) selects Meticulous Keyed MD5, in which every
|
||||
# packet must carry a newer sequence number; the remote must be set to the same mode.
|
||||
# - address: 192.0.2.4
|
||||
# local: 192.0.2.1
|
||||
# auth:
|
||||
# type: md5
|
||||
# key_id: 1
|
||||
@@ -59,6 +65,7 @@ peers:
|
||||
#
|
||||
# Keyed SHA1: `key` is exactly 20 bytes. `meticulous` as above.
|
||||
# - address: 192.0.2.5
|
||||
# local: 192.0.2.1
|
||||
# auth:
|
||||
# type: sha1
|
||||
# key_id: 1
|
||||
@@ -66,6 +73,7 @@ peers:
|
||||
#
|
||||
# Simple password: 1 to 16 bytes, sent in the clear. Provides no protection against an attacker on the path.
|
||||
# - address: 192.0.2.6
|
||||
# local: 192.0.2.1
|
||||
# auth:
|
||||
# type: password
|
||||
# key_id: 1
|
||||
|
||||
Reference in new issue
Block a user